Aug 12 21:14:53 rotse3a schierd: Error reported on RA Axis:
Aug 12 21:14:53 rotse3a schierd: @RecentFaults Axis 1 High Output 8/12/2002, 20:19:36.277;
In this case, the RA axis (axis 1) motor has tried pushing too hard. This is usually caused when the mount is trying to track through a region where the balance is bad; the motor tries to keep the axis steady, and fails. On telescope set-up, we should have a systematic check to ensure that the telescope can track through the entire hemisphere.
It is also possible that there is a cable snag. After making adjustments to the mount, make sure that all cables are securely locked away.